|
(hull and tracks from T54 with new resin turret and metal barrel)
The 1/72 T-44M is a multimedia kit (with plastic chassis and body complete with resin turret and metal barrel and small parts) and the
quality is quite nice for this manufacturer.
T-44 was a lesser known Russian tank developed in 1943 as a replacement for the famous T-34 model, but due to war demands production started
only in early 1945 and this it did not reach the fronts. Yet, it was produced in significant numbers and production stopped only with the
introduction of the T-54 model. The chassis was used in many specialized vehicles.
T-44M was an improved model which was produced in larger quantity than the original T-44 model.
This is a strictly limited kit with production being limited to just one batch.
Comments by Jolyon Ralph
Essentially it's the old PST T-54 kit with a new resin turret for the T-54-2 variant (Not the earlier T-54-1 which is the m.1946 version) -
probably a better option is to get the modeltrans T-54-2 turret and fit that to a Trumpeter T-54 hull - note that it's not that simple with the
T-54-1 turret that Modeltrans sell, as the T-54-1 hull had various differences, including machine-gun pods on the fenders, so you'd need a new hull
top as well as a turret, but that's another issue altogether)
This vehicle is in every Russian regiment which is armed with movable artillery, rockets, etc. It has a places for canteen, bedroom and combat compartment with BTR-70 turret.
Model built by Andrey Kovalchuk
Pictures built model by Zebrano
Website "ScaleModels.ru.
Kit 72077 - GAZ MM M1941 Truck - reboxed under Zebrano label - (2017)
Kit 72078 - GAZ MMM M1943 Truck - collaboration between "PST/Zebrano" - (Other instructions & Sprue layout)
Finished model by Andrey Kovalchook
Kit 72079 - GAZ MMM M1943 Truck - reboxed under Zebrano label - (2017)
Model built by Vojislav Jereb
Model built by Peter Batin
Soviet City Bus GAZ-03-30 (m.1933)
The soviet bus GAZ-03-30 was designed in 1932 on the basis of GAZ-AA truck units and found wide application both in the civil service and in the Red Army. The civil version was designed for transportation of 17 passengers. An army bus was used as a headquarters, while he could have another configuration of the cabin and additional equipment for communication. The bus of this model was produced from 1933 to 1941.
Exterior of the GAZ-03-30 bus was supposed to be as follows:
- the roof and the sides over the waist were painted in light-yellow color
- the body below the waist, the hood, radiator cover, apron and wheels were painted in dark blue, dark green or dark red
- the wings - in black or body color below the waist
- the fenders and bumpers - in black
The ceiling, the walls and seats inside were papered leatherette.
The rest of the surface were covered by oil paint and varnish.
The floor was painted in black.
Soviet City Bus GAZ-03-30 (m.1945)
The soviet bus GAZ-03-30 was designed in 1932 on the basis of GAZ-AA truck units and found wide application both in the civil service and in the Red Army. The civil version was designed for transportation of 17 passengers. The bus of this model was produced from 1933 to 1941 in the quanttaty of 6569 vehicles. During World War II the issue of the bus almost stopped (it was issued only 28 buses). After the war, the release of GAZ-03-30 was relaunched, but on the basis of GAZ-MM. External differences was in the wings and two-part rear door. The total issue of GAZ-03-30 m.1945 during 1945 - 1950 was 8211 vehicles
As Russia made special vehicles to provide the anti-COVID vaccination on its tremendous expances, the PST issue their MAZ-543M in a variant of Medicine Labaretory. - Limited version (200 kits only)
Kit 72001 - Gaz AA (AAA) truck with Quadruple Maxim anti-aircraft machine-gun 4M (4M) - with resin parts - (Out of Production)
Kit 72001 - Gaz AA (AAA) truck with Quadruple Maxim anti-aircraft machine-gun 4M (4M) - collaboration between "UM/Zebrano" - re-tooled model
Website "ScaleModels.ru.For an "Jolyon Ralph" review about kit 72001 - Gaz AA (AAA) truck with Quadruple Maxim anti-aircraft machine-gun 4M (4M) visit:
Built model by Zebrano - metal gun from Miniworld
Old version with resin parts - (Out of Production)
Built model by HenkofHolland
For an "HenkofHolland / OTW" preview about kit 72004 - KV-6 SPG = (KV-7 version 1) - Prototype visit:
For an "Leonid Postny / 1/72 depot" pictures built model kit 72004 - KV-6 SPG = (KV-7 version 1) - Prototype visit:
For an "Daniel Reifer / Hugos Hobbies" unboxing kit 72004 - KV-6 SPG = (KV-7 version 1) - Prototype visit:
"Hugos Hobbies" on YouTube - "German Language"
Built model by HenkofHolland
Built model by Zebrano
Kit 72011B - T-54-1 (same kit as 72011 but with metall DShKM gun )
The box contains parts of the T-55 from PST and the Sam S-75 from Gran - (Collaboration between Zebrano, Gran & PST)
The box contains parts of the T-55 from PST and the Pechore S-125 - (Collaboration between Zebrano, A&A & PST)
Model built by Peter Batin
Model built by Udo Bauer
ZEBRANO 72021 is an interesting kit but expensive. The chassis of PST is in my eyes from less quality. I have combinated the Trumpeter 7282 with GRAN 7209.
I will build the mobile complex S-125 Newa / Petchora on T-55
On the Internet these fla-rocket complexes can be seen in Polish and Cuban air defense (with minor differences
Question: What is the elastic tube on the right side? I suspect that the Poles have created prepared places for the vehicles. There are communications
(power supply, data transmission). The cables are connected to the vehicle and protected by a flexible metal tube (the Kopex tube) in front of the
jet when the rocket is launched
In some photos, the cables can also be seen without a protective tube. So, however, it looks more interesting from my point of view on the model
Model built by Wang XianGui, from China
based on parts from Zebrano S-125M+Trumpter T-55+ OKB resin tracks - (Gran ltd and/or AAModels?)
The box contains parts of the T-55 from PST and the Pechora S-125 from Gran - (Collaboration between Zebrano, Gran & PST)
pictures built model taken from http://000716.taobao.com
Finished and corrected model by Steve Beat
This is a resin kit and not a "plastic kit" as stated on the box
Note: Tony Mackinder: - The decal sheet has markings for both kits, but lacking any white stars or a bridging disc (14 on yellow). Instructions are very skimpy having been copied from elsewhere and there is no indication of colours or where the markings should go. However, an excellent guide is the Miniart 1/35 AEC instructions.
This is a resin kit and not a "plastic kit" as stated on the box
Note: Tony Mackinder: - The decal sheet has markings for both kits, but lacking any white stars or a bridging disc (14 on yellow). Instructions are very skimpy having been copied from elsewhere and there is no indication of colours or where the markings should go. However, an excellent guide is the Miniart 1/35 AEC instructions
Assembled model by Andrey Kovalchuk
The armored car Marmont-Herrington Mk.II was produced in the Republic of South Africa in 1940 - 1941. Option ME (Middle East) was intended for action in the Middle East. Armored vehicles were delivered to the combat units of South Africa, which participated in the hostilities in North Africa, as well as to units of Great Britain. The armament consisted of a 7.7 mm Bren machine gun, a 13.97 mm Boys anti-tank rifle and an anti-aircraft machine gun. In total, 338 armored vehicles of this variant were manufactured
Model built by Udo Bauer
BRDM-1 by ZEBRANO as a reconnaissance vehicle of the Soviet naval infantry. I have reworked and added a number of details. The kit is fine, it's a pity that the car body is solid material. - Udo Bauer
The armored car for the Royal Navy Air Service (R.N.A.S.) was developed by Lanchester on the basis of the Lanchester 19B light truck in 1914. The armored vehicles entered service in 1915. The vehicle was armed with a 7.7 mm Vickers-Maxim machine gun and had an armor thickness of 8 mm. The armored car took part in the battles of the 1st World War and the Civil War in Russia.
Built model by Zebrano
For an "Jürgen Bellenbaum / IPMSDeutschland" review about Kit 72041 - Lanchester British Armored Car - (resin kit) visit:
Built model by Andrew Kovalchuk
Built model by Andrew Kovalchuk
Built model by Zebrano
Having captured a large number of T-20 Komsomolets small artillery tractors as trophies as a result of the first battles of the Great Patriotic War, the Germans used them for their own needs. The tractors were subjected to various alterations, in particular, 37-mm Pak.35 / 36 anti-tank guns were installed on them. The exact number of converted tractors is not known, but there were several dozen.
In connection with the identification of a large number of shortcomings of the T-37A tank during operation in the army, it was decided to design a new tank,
free from the shortcomings of the previous one. The design bureau of plant No. 37 under the leadership of N.A. Astrov took up the solution to the problem.
As a result, in February 1936, the T-38 amphibious tank was adopted by the Red Army.
The armament remained the same - one DT machine gun of 7.62 mm caliber. The tank was in production from 1936 to 1939. A total of 1382 T-38 tanks were
produced.
Built model by Zebrano
L6/40 light tank was developed by the Italian company FIAT-Ansaldo in 1940. The tank was armed with a 20 mm cannon and an 8 mm machine gun. Serial production began in 1941 and continued until 1944. A total of about 450 tanks were produced
Built model by Andrey Kovalchuk
Finished model by http://darksun.denw.ru/v/tanks/russian/bt/bt4/
For an "Alexander Kolbasov / OTW" preview about kit 72104 - BT-4 visit:
The BT-4 was a factory prototype by "Kharkov Factory", with hull features similar to the BT-3 but with twin turrets replacing the single turret and minor changes in the suspension. (3 prototypes were produced (with partially riveted hull)
Summary, there are exist only "4 fake photos / photoshop” of BT-4 in internet - (info Alexander Kolbasov)
In fact, info for modelers: - (info Alexander Kolbasov)
Main item!!! BT-4 as an official twin turret project had never been exist! In Government Projecting Program BT-4 as project did not exist.
BT-4 started and finished in 1932. Totally were produced 3 tanks on Kharkov Factory, but as experimental sample. It was initiative of the Factory.
Government did not give official design order for it. Main difference with BT-2 is welded body. So, 3 samples were produced, then BT-4 production stopped,
further their life story unknown. It is possible that they were used for study purposes, but nothing info more. Since 1932 it story missed. Also there
is no any information about their using in WW2.
May 2017 - info from Alexey Kiyanov, from Russia
I want to inform about the tank BT-4 from Zebrano. This tank did not exist NEVER. All the information about him, schemes and photos - it was a joke on
the first of April of our Russian technology historians Svirin and Kolomiets. The joke was not the most successful. Keep this in mind. Not "what IF"
or unrealised "paper" projects, but just a joke.
Sincerely, Kiyanov Alex Aka Ornst
Fake photo 1
Fake photo 2
Fake photo 3
Fake photo 4
This kit will be reissued in summer 2017 with new lorry tooling and new item number
Built model by Andrey Arkhangelskiy
For "Simon Ashford / OTW" preview of Kit 72108 - Red Army Staff Car visit:
Built model by Andrey Arkhangelskiy
For an "Jan Willisch / IPMSDeutschland" review about Kit 72109 - Red Army Staff Car - "Model A American Car" visit:
Model built by Andrey Kovalchook
Built model by Andrey Kovalchuk
Light armored car D-8 was created by engineer N. Dyrenkov on the base of Ford-A car in 1931. The armored car was armed with one 7.62 mm DT machine gun with 2709 rounds of ammunition. Four embrasures were made in the body of an armored car for shooting. About 50 armored cars D-8 were issued in total. The D-8 armored cars consisted In the armament of the Red Army until the end of 1942
Built model by Andrey Arkhangelskiy
Same kit as "ZV Models Kit 72001 - German Einheitsdiesel & MAC Kit 72037 - Einheits-Diesel Truck, but with tilt and Flak 38 which is from Ace kit72288 - Flak 38
Built model by Zebrano
The GAZ-4 pick-up truck was designed in 1933 on the basis of the GAZ-AA "Polutorka" (kit 72112) and the GAZ-A chassis (kit 72108).
The car had a carrying capacity from 500 kg. The pick-up was produced in 1933 - 1937. There were produced about 10,5 thousand
machines in total
Many cars were delivered to the Red Army, where they were used in direct purpose and as carriers of weapons.
There were 545 GAZ-4 pickup trucks in the Red Army on June 1, 1941.
Radio station variant
Model built by Andrey Kovalchuk
Model under construction by Udo Bauer
Vehicle was 2020 on Victory Parade in Moscow
In order to test the new artillery system in 1939, the L-11 gun was set in the turret of the tank BT-7A. The tests were successful, but on the results engineers have come to the conclusion that the gun L-11 is not suitable for using in BT tanks. BT-7/L-11 was released in the only one instance
In order to test the new artillery system in 1939, the F-32 gun was set in the turret of the tank BT-7A. The tests were successful: gun F-32 proved to be more suitable for use in BT tanks (then had being tested gun L-11), and subsequently it was placed in the tanks T-34 and KV.
After the troubles the Soviet Army faced during the Winter War with Finland while overcoming the "Mannerheim Line", it was decided to design a tank with a 152 mm caliber weapon. In the short term (2 weeks), a team of engineers from the Kirov plant designed the turret with installation of the M-10 howitzer for the KV tank. The new artillery system had a shorted barrel and was designated as MT-1.
According to the decision of committee of defense in 17.07.1940, it was entrusted to Leningrad Kirovsky Plant to design and construct the self-propelled installation armed 152mm gun BR-2. The T-220 tank had to stay as the base for this SPG. During the design process it was supposed to consider the experience got during winter war. Production of Object-212 began on Kirovsky plant in 1941, however from the beginning of war operations the production of this prototype model was stopped, and subsequently it was sorted.
For an "Alexander Kolbasov / OTW" preview about kit SEA023 - Object 212 Heavy SPG visit:
Finished model by Andrey Arkhangelsky
The kit is combination of BT-7 hull from UMMT and Zebrano resin parts. - (Finished model by Andrey Arkhangelsky)
The kit is combination of BT-7 hull from UMMT and Zebrano resin parts - (Finished model by Andrey Arkhangelsky)
The kit is combination of T-26 hull from UMMT and Zebrano resin parts - (Finished model by Andrey Arkhangelsky)
Model built by Andrey Arkhangelsky
The heavy C-51 SPG was designed at the end of 1943 at the CADB under the leadership of V.G.Grabin. In order to obtain a powerful mobile fire weapon, the designers installed a 203-mm howitzer B-4 on the body of a heavy tank KV-1S. The result was not very successful and after the tests in early 1944 the project was closed.
Built model by Andrey Kovalchook
Built model by Udo Bauer
The search for the vehicle was very difficult. Unfortunately, there are only a few photos of the S-51. Some questions remained open.
Some modellers in 1:35 have "fantastic" solutions regarding the storage of ammunition ready: cartridged ammunition in caliber 203.2mm - only the grenade
weighs 100kg! The howitzer had separate ammunition = grenade and cargo. Some photos show a cabinet / box on the right front chain cover, where only the charges (6-8 pieces) may have been stored.
In the Russian literature it is said that the Howitzer was always loaded from ground and that at least 5 men were needed.
The service had a carrying rack with a shell for the grenade (I have modeled the frame, located next to the grenades). The was pushed over the ladders
and a rail at the rear by 3 man pushed up, the men are high and the grenade was carried to the bottom of the howitzer. It could have been like that, that
would be the Russian style of the 30s - 40s. This is my interpretation of the original photos about the charging process.
You see, I've made a lot of changes. The gun-barrel has been too thin. I replaced it with a 4mm brass tube. The shields I have made foldable. In the transition
from the Marschlage (the tube was pulled back) in the battle position (Rhor in the suspension), the shields served as a working platform).
S-51 in 1/35 scale
For more information of S-51 SPG visit:
"panzerserra.blogspot.com" Blogspot
Built model by Andrey Arkhangelsky.
Heavy self-propelled gun S-59 was developed in the design bureau of plant number 100. This vehicle was distinguished from the S-51 self-propelled guns by the installation of a 152-mm Br-2 gun. The gun was mounted on the chassis of the KV-1S heavy tank and was intended, first of all, to combat reinforced concrete fortifications. SPG was tested in May - June 1944, which could not stand it. After testing, the project was closed.
The experimental anti-tank self-propelled gun ZiS-41 was developed on the basis of the ZiS-22M half-track vehicle at the V.G. Grabin design department. The new SPG was tested early in 1942 and was armed with a 57mm ZiS-2 anti-tank gun with 100 rounds of ammunition and a 7.62mm DT machine gun. The tests results were unsatisfactory, and the anti-tank SPG did not received further development. Later, on the basis of the ZiS-41, an ammunition transporter for the M-30 howitzer was developed.
Built model by Andrey Kovalchuk
As part of a study of the possibilities of arming Soviet tanks with combined missile weapons, the Volgograd Tractor Plant designed the Object 170 tank. The tank was armed with two Coral rockets launchers with drum-type ammunition tracks and ATGM Malyutka. Additional armament consisted of a 7.62 mm machine gun.
Kit SE01-01 - Ralley Participant No. 21 GAZ-A
The first kit of "SE" serien is GAZ-A with special tyres and is dedicated to Moscow-Caracum Desert-Moscow rally
Built Gaz-A
A semi-new kit appeared in KaraKum Trial project. It's an AMO-3 lorry. As there were no external difference with ZiS-5 truck, I give the ZiS-5 moulds to this kit. And add some resin parts. (Next month will follow GAZ-AA and GAZ-AAA kits as Rally Participants and the project will be finished)
Kit 72008 - 4M Gun Crew - (crew for Kit 72001)
For "Cristian Florescu's / ww2germans" review of 72012 - German Tank Crew, 1944 visit:
Website Zebrano Models - (Russian and English language)
E-mail to Zebrano Model Belorussia
Soviet Armour - (Russian language - use Google translating)
Note: To become a valid e-mail address, replace in email address (at) with @
|
|
"On the Way" Website
"1/72 depot" Website
"IPMS.de" Website
"survincity.com" Website
"ww2germans" Website
E-mail to HenkofHolland